Asio Behringer Usb Audio Drivers For Mac
- Behringer Universal Usb Asio Driver
- Behringer Asio Usb Driver
- Asio Behringer Usb Audio Drivers For Mac Pro
.Core Audio and Mac OS are trademarks of Apple Inc. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. ASIO is a trademark and software of Steinberg Media Technologies GmbH. All third-party trademarks are the property of their respective owners. Their use neither constitutes a claim of the trademark nor affiliation of the trademark owners with MUSIC Group. Product names are mentioned solely as a reference for compatibility, effects and/or components.
Warranty details can be found at music-group.com.
USB audio driver in USB Audio Player/Recorder PRO and Audio Evolution Mobile Last update: Nov 30, 2018 Introduction eXtream Software Development has written a custom USB audio driver from scratch because Android did not support USB audio until Android 5. Even Android 5 and upward has very limited support for USB audio devices (see below) and as such this driver remains very useful for every Android version higher than 3.1. Next to that, our driver provides low latency, making it possible for example to play virtual instruments in real-time on many devices that cannot do this using the Android driver. The driver supports mono, stereo and multi-channel streams, 16-, 24- and 32-bit resolutions and any sample rate that the device provides. If your device exposes internal mute, volume and/or gain controls, they can be controlled as well. The following Android apps of eXtream Software Development have this driver embedded. Note that you cannot use this driver to play or record audio in other apps!
Is the leading multitrack audio and MIDI DAW on Android. You can enable USB audio by doing an in-app purchase or by purchasing USB Audio Recorder PRO. Without in-app purchase, the app lets you test your USB audio interface/mic by limiting the recording time. Is a high quality media player that allows the highest quality possible audio playback to your DAC and supports most audio formats like DSD, FLAC, APE, MP3, etc.
It can also function as UPnP media renderer. Is a basic recording app without editing facilities. Record mono, stereo or multi-channel audio and play back in stereo. Simultaneous playback and recording is not supported. Free trials are available from this site. USB host OTG cable In order to connect your USB audio interface to your Android device you will need a USB OTG cable to trigger the 'USB host' functionality of your Android device (for devices with a micro-USB connector).
This is the cable you need (when you order a cable, make sure it says 'OTG'): If you have a USB-C connector on your Android device, you will need a converter cable that provides both data and power: If you need to give your audio device extra power, you can either use a powered USB hub or this OTG-Y cable: This cable is similar to a standard USB OTG cable with a full sized female USB connector on the end that connects to the audio interface, but it branches off into 2 connectors on the other end. One is a standard male micro USB connector for connecting to the android device and the other is a female micro USB connector. The female micro USB connector allows the ability to plug in a standard male micro USB wall charger to inject power into the circuit.
Note: some devices require 500mA while some Android wall-adapters only supply 300mA, so using an OTG-Y cable will not help with those and a more powerful adapter or a powered USB hub may be necessary. Do NOT use or buy this one: Starting the app Important: connect your device BEFORE starting the app, otherwise it often does not get detected! When you connected your device before starting the app and it gave you a 'failed to initialize or open the USB device' message or similar, we ask you kindly to quickly use the Play Store refund option in case you purchased the full version and try out the demo. Please contact us if your device does not work. Hint: for most reliable recording, put your device into 'Airplane' mode and shut down as many tasks as possible using task killers such as 'Advanced Task Killer'. Please also disable any battery saving mode if present.
Currently, USB Audio Recorder PRO and Audio Evolution Mobile have to run in the foreground, so do not switch to other apps during recording or playback since background apps only get 5% cpu time max. This does not all apply to USB Audio Player PRO, but it can help nevertheless. We are also NOT affiliated with a program called 'USB Audio Recorder', 'USB Audio Tester' or 'USB Field Recorder' on the Play Store! Troubleshooting Ok, so you connected your USB audio device before starting the app and it still doesn't work, what to do?
If both your Android and USB device are in the supported devices lists:. Some devices require more power than your Android device can deliver. If your audio device is bus-powered (no wall adapter) you could try putting a powered USB hub in between. Reboot your Android device with the USB audio interface connected. Some devices require you to turn on USB debugging from the Android settings - Developer options. Please let us know if yours does. If you have a micro-USB port on your Android device, make sure you really have an OTG adaptor cable and not some sort of simple USB type converter, otherwise USB host mode is not activated.
It happens more often than one thinks that the micro-USB cable is not fitted fully into the micro-USB port. Make sure it fits really good and if your audio device has a USB light, check if it turns on when you connect it to your Android device.
Behringer Universal Usb Asio Driver
If it is not lit, then either the cabling is not right or your audio device consumes too much power. Note that the USB light must already be lit BEFORE starting the app. Some devices are just picky (FiiO E17/E18 for instance). Try to disconnect the cable and reconnect it, start the app, see if it helps. For the FiiO E17: try to cycle the input until it is at the USB input again, do this before starting the app, but with the USB cable connected. Go into Android Settings - Storage - tap on the menu at the top right and select USB computer connection and see if MTP is enabled. Buy another OTG cable, it happens so many times that people switch cables and things start working again, it's surprising.
Behringer Asio Usb Driver
If the app recognizes your device and all looks ok until you press play or record and nothing happens or no signal comes in:. Your Android device supports USB host, but something is missing in the kernel (or perhaps the hardware) that prevents the use of the required USB isochronous mode for transferring audio data.
Device detection is done using other types of communication, which is why it did get detected. If the app recognizes your device and all looks ok until you press play or record and then you get a 'Failed to start recording/playback':. Check if the kernel version of your device is at least 3.4.0. Some older versions have a bug which results in a wrong USB bandwidth calculation. Using a multi-channel device or simultaneous playback and recording can then result in this message. If your Android or USB device is not in the list:. Make sure your Android device has USB host mode: Google your device like 'Acer Iconia A100 USB host mode'.
If you find hits saying it doesn't have USB host mode, then your device will not work. If you find hits stating that a custom kernel can activate USB host mode, then your device will not work unless you have that specific custom ROM. Use the app 'USB host viewer' to find out if your Android device is seen by Linux (the actual operating system that Android runs on top of). If your USB audio device is not see by this app, it means that Linux does not see it and hence Android or the app cannot use it. The reason can be a cable or power problem or missing USB host mode. If the app does see it and Android does not see the device, then your Android device is misconfigured: it thinks it has no USB host mode, whereas it actually does in hardware. Only rooting your device and running the app 'USB host check' and pressing the 'Fix' button can solve it.
Asio Behringer Usb Audio Drivers For Mac Pro
Make sure your USB device is class-compliant: Google your audio device to check if it works under Linux or with an iPad since it then has a bigger chance of working (not that we use Linux drivers, but they usually have class-compliant devices working). Check if your device has a Rockchip processor. Most Rockchip processors except the RK3188 do not support USB host.
Most cheap unbranded/unknown/Chinese tablets do not work. If it didn't cost 150 euro or more, it is likely it doesn't have the hardware or kernel needed. If that didn't help and you are sure you have an Android device with USB host mode, you could send us a more detailed log by following these steps:. Open the app. Select settings or prefs. Select Logging. Select Log to file.
Exit the app. Force close the app or restart your Android device with the USB audio device attached. Start the app again and exit it again. Please email the log file USBAudioLog.txt for USB Audio Recorder PRO, UAPP/UAPP.txt for USB Audio Player PRO or AudioEvolution/AELog.txt for Audio Evolution Mobile to This email address is being protected from spambots. You need JavaScript enabled to view it.
And let us know which Android and USB audio devices you are using Android 5 and up Google introduced USB audio support in Android 5, unfortunately our tests have shown that their driver has several limitations (aside not offering low latency). Please see here for more information: Special instructions for Sony devices Some newer Sony devices likes the Z5 need special handling to detect USB devices:. Connect the DAC to the cable.
Open settings, device connection, USB connectivity, then click the button to detect USB device. While it is detecting, plug in the other end of the OTG cable to the phone. If your OTG has the optional power in connect it now. Supported USB audio devices Your USB audio device must be class-compliant in order to work. USB 1.1 and USB 2.0 class-compliant devices are supported with either USB audio spec 1.0 or 2.0.
The following table gives an overview of the devices that either we tested or that have been tested by beta testers. In no way we can be held responsible for a device not working on your specific Android device, since every combination can pose new problems. We have a free demo version where you can test out your device combination before purchase.
Please take note: because there are hundreds of Android and USB audio devices out there, we did not manage to test them all. In case yours does not work and you are using USB Audio Recorder PRO, please use the 'feedback' button on top to send us information on your device or contact us by email. When you start recording and you get a message saying 'Failed to start recording', it is likely that your device does not supply enough power to your USB audio device if it is not self-powered. You can work around it by putting a powered USB hub in between.