How To Format An External Hard Drive For Mac
This answer explains how to format a WD drive for use on Windows and macOS.END External hard drives and external solid state drives come pre-formatted and ready for use. Internal HDD and internal SSD drives do not ship pre-formatted and will need to be Partitioned and formatted before being used. Please note the instructions do not differ when formatting different capacity sizes, this is not capacity specific. Critical: The instructions in the article below are designed to help repartition and format a hard drive. This process is Data Destructive and cannot be undone.
Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST! Important: Please note if this is the first time connecting an external device to a macOS, there is a Reformatting Required for Mac OS Compatibility, please see. Select an Operating System (OS) Operating System Instructions Windows 10 and 8.1 Windows 7 and Windows Vista macOS 10.14.x (Mojave) macOS 10.13.x (High Sierra) macOS 10.11.x (El Capitan) and macOS 10.12.x (Sierra) macOS 10.9.x (Mavericks), and macOS 10.10.x (Yosemite) macOS 10.7.x (Lion), and macOS 10.8.x (Mountain Lion) Both Windows and macOS (exFAT & FAT32).
APFS formatted volumes can be read by a macOS High Sierra (10.13), but not by a macOS Sierra (10.12) or earlier. For more information, please refer to. If the following message occurs during the format procedure, MediaKit reports not enough space on device for requested operation. Operation failed., please refer to. For instructions to convert a drive to (APFS) Apple File System Format on macOS High Sierra (10.13), please refer to Important: If at any time an error occurs stating that the drive can not be dismounted or unmounted, this is not caused by an issue with the hard drive. Please see for additional information on this particular issue. How to Partition and Format a Drive on Windows 10 and 8.1 Partitioning a hard drive means preparing it to be used by the, creating a Volume for the OS to use.
Formatting, however, deletes the content of a volume to clean it, and assigns a file system to it so that data can be moved into and out of the volume. Both processes are normally done together. Critical: The instructions in the article below are designed to help repartition and format a hard drive.
This process is Data Destructive and cannot be undone. Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST! Windows 10 includes a built in utility known as Disk Management that can be used to partition and format a hard drive. To partition and format the drive with Disk Management, follow these steps:. Right-click on Start, the Windows logo on the bottom-left of the screen, and click Disk Management.
In the Disk Management window, the lower pane will display a list of available drives. Identify the drive that needs to be partitioned and formatted, and make sure that all critical data on this drive has been backed up elsewhere.
If there is already a partition on the drive, the bar above that drive will appear blue. If there is no critical data on the drive, or the data has been successfully backed up, right-click the bar and click Delete Volume. Important: If Disk Management shows the drive as Not Initialized, the drive will have to be initialized. For assistance initializing a hard drive, please see. If there is no partition and data on the drive, it will appear as Unallocated, with a black bar on top. Right-click the Unallocated space or the black bar, and click New Simple Volume. The Welcome to the New Simple Volume Wizard will open.
Click Next to proceed. Choose the volume size and click Next. By default, the maximum disk space is already selected and it is recommended to leave it at the maximum disk space.
Note: To create multiple partitions, select or type a specific number of megabytes (MB) for the first partition and continue to the next step. Once done with this process, the remaining space will display as unallocated space. Now, create another New Simple Volume in the remaining unallocated space for the next partition. For example, on a 2TB drive, set the volume size to 1000000 (1 TB) and continue to the next step. When done, begin the New Simple Volume process again and select the remaining capacity, the unallocated space, for another 1TB partition. Assign a drive letter to represent the volume being created, and click Next. By default, this is the next available letter.
Next is the File System, which controls how the data is read and written. Set the file system to NTFS, which is the default Windows file system, and leave the Allocation unit size to Default. The Volume Label field can be customized in order to give the volume a desired name, such as My Book or WD Black 1. Check the box labeled Perform a quick format and click Next.
Click Finish to begin formatting the drive. When complete, the drive will appear with a blue bar as in the image below. How to Partition and Format a Drive on Windows 8 or 8.1 Partitioning a hard drive means preparing it to be used by the, creating a Volume for the OS to use. Formatting, however, deletes the content of a volume to clean it, and assigns a file system to it so that data can be moved into and out of the volume. Both processes are normally done together. Critical: The instructions in the article below are designed to help repartition and format a hard drive.
This process is Data Destructive and cannot be undone. Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST! Windows 8 includes a built in utility known as Disk Management that can be used to partition and format a hard drive. To partition and format the drive with Disk Management, follow these steps:.
Right-click on the lower-left corner of the desktop screen and click Disk Management. In the Disk Management window, the lower pane will display a list of available drives. Identify the drive that needs to be partitioned and formatted, and make sure that all critical data on this drive has been backed up elsewhere. If there is already a partition on the drive, the bar above that drive will appear blue, which indicates the drive is already formatted and may contain data. If there is no critical data on the drive, or the data has been successfully backed up, right-click the bar and click Delete Volume. Important: If Disk Management shows the drive as Not Initialized, the drive will have to be initialized. For assistance initializing a hard drive, please see.
If there is no partition and data on the drive, it will appear as Unallocated, with a black bar on top. Right-click the Unallocated space or the black bar, and click New Simple Volume. Click Next to proceed.
Choose the volume size and click Next. By default, the maximum disk space is already selected and it is recommended to leave it at the maximum disk space. Note: To create multiple partitions, select or type a specific number of megabytes (MB) for the first partition and continue to the next step. Once done with this process, the remaining space will display as unallocated space. Now, create another New Simple Volume in the remaining unallocated space for the next partition.
For example, on a 2TB drive, set the volume size to 1000000 (1 TB) and continue to the next step. When done, begin the New Simple Volume process again and select the remaining capacity, the unallocated space, for another 1TB partition. Assign a drive letter to represent the volume being created, and click Next. By default, this is the next available letter. Next is the File System, which controls how the data is read and written. Set the file system to NTFS, which is the default Windows file system, and leave the Allocation unit size to Default.
The Volume Label field can be customized in order to give the volume a desired name, such as My Passport or WD Black 1. Check the box labeled Perform a quick format and click Next. Click Finish to begin formatting the drive. When complete, the drive will appear with a blue bar as in the image below. How to Partition and Format a Drive on Windows 7 and Windows Vista Critical: The instructions in the article below are designed to help repartition and format a hard drive.
This process is Data Destructive and cannot be undone. Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST! Windows includes a built in utility known as Disk Management that can be used to partition and format a hard drive. To partition and format the drive with Disk Management, follow these steps:. Click on Start and right-click Computer. Click on Manage. A window called Computer Management will open, displaying two panes.
On the left-side pane, under Storage, click on Disk Management. This will load Disk Management on the right-side pane.
Disk Management will proceed to display all the hard drives detected by Windows. The window may need to be maximized in order to see all the drives listed. The lower pane will display a list of available drives. Identify the drive that needs to be partitioned and formatted.
It typically has a black bar indicating unallocated space. Important: If Disk Management shows the drive as Not Initialized, the drive will have to be initialized. For assistance initializing a hard drive, please see. If there is already a partition on the drive, the bar above that drive will appear blue. This indicates that the drive is already formatted and may contain data. Make sure that all critical data on this drive has been backed up elsewhere. When ready to proceed, right-click on the blue bar and choose Delete Volume.
The bar should now be black. Right-click on the unallocated space or the black bar to see a menu of available options, and click on New Simple Volume. The Welcome to the New Simple Volume Wizard will appear. Left-click on Next to proceed to the next screen. Choose the volume size and click Next. By default, the maximum disk space is already selected and it is recommended to leave it at the maximum disk space. Note: To create multiple partitions, select or type a specific number of megabytes (MB) for the first partition and continue to the next step.
Once done with this process, the remaining space will display as unallocated space. Now, create another New Simple Volume in the remaining unallocated space for the next partition. For example, on a 2TB drive, set the volume size to 1000000 (1 TB) and continue to the next step. When done, begin the New Simple Volume process again and select the remaining capacity, the unallocated space, for another 1TB partition. Assign a drive letter to represent the volume being created, and click Next. By default, this is the next available letter.
Next is the File System, which controls how to data is read and written. Set the file system to NTFS, which is the default Windows file system, and set Allocation unit size to Default. The Volume Label field can be customized in order to give the volume a desired name, such as My Passport or WD Black 1. Check the box labeled Perform a quick format and click Next. Click Finish to begin formatting the drive. Note: If an error message is received stating that Windows is unable to unmount the drive, this means that there is a program or service currently reading or writing data on the drive.
Determine what program is accessing the drive and shut it down, and then try again. Please see for assistance with this error under Windows. The listing for the drive (Disk 3 in the picture below) will say Formatting as it formats the drive. This process may take a few seconds. When the drive is done (Disk 3 in the picture below), the bar will be blue and the drive will say Healthy. How to Partition and Format a Drive on Windows Vista Partitioning a hard drive means preparing it to be used by the, creating a Volume for the Operating System to use.
Formatting, however, deletes the content of a volume to clean it, and assigns a file system to it so that data can be moved into and out of the volume. Both processes are normally done together. Critical: The instructions in the article below are designed to help repartition and format a hard drive. This process is Data Destructive and cannot be undone. Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST!
Windows Vista includes a built in utility known as Disk Management that can be used to partition and format a hard drive. Please see for more information. Please follow the steps outlined below:.
The lower pane will display a list of available drives. Identify the drive that needs to be partitioned and formatted. It typically has a black bar indicating unallocated space. Important: If Disk Management shows the drive as Not Initialized, the drive will have to be initialized. For assistance initializing a hard drive, please see. If there is already a partition on the drive, the bar above that drive will appear blue.
This indicates that the drive is already formatted and may contain data. Make sure that all critical data on this drive has been backed up elsewhere. When ready to proceed, right-click on the blue bar and choose Delete Volume. The bar should now be black. Now right-click on the unallocated space or the black bar to see a menu of available options, and click on New Simple Volume. The Welcome to the New Simple Volume Wizard will appear. Left-click on Next to proceed to the next screen.
Choose the volume size and click Next. By default, the maximum disk space is already selected and it is recommended to leave it at the maximum disk space. Note: To create multiple partitions, select or type a specific number of megabytes (MB) for the first partition and continue to the next step. Once done with this process, the remaining space will display as unallocated space. Now, create another New Simple Volume in the remaining unallocated space for the next partition.
For example, on a 2TB drive, set the volume size to 1000000 (1 TB) and continue to the next step. When done, begin the New Simple Volume process again and select the remaining capacity, the unallocated space, for another 1TB partition. Assign a drive letter to represent the volume being created, and click Next. By default, this is the next available letter. Next is the File System, which controls how to data is read and written.
Set the file system to NTFS, which is the default Windows file system, and set Allocation unit size to Default. The Volume Label field can be customized in order to give the volume a desired name, such as My Passport or WD Black 1. Check the box labeled Perform a quick format and click Next. Click Finish to begin formatting the drive. Note: If an error message is received stating that Windows is unable to unmount the drive, this means that there is a program or service currently reading or writing data on the drive. Determine what program is accessing the drive and shut it down, and then try again.
Please see for assistance with this error under Windows. The listing for the drive (Disk 1 in the picture below) will say Formatting as it formats the drive. This process may take a few seconds. When the drive is done (Disk 1 in the picture below), the bar will be blue and the drive will say Healthy. How to format a drive on macOS 10.14.x (mojave) Critical: The instructions in the article below are designed to help repartition and format a hard drive.
This process is Data Destructive and cannot be undone. Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST!. Open Disk Utility. Please See. From the left Column chose the External drive (My Passport, My Book, etc.).
Click the Erase Button. Type the drive new Name (My Passport, My Book, etc.). Click the Format drop down. Choose a new Format: Mac OS Extended (Journaled). Click Erase button. When finished, the drive will be formatted and repartitioned successfully.
Click the Done button. How to partition and format A DRIVE ON macOS 10.13.x (High Sierra) Critical: The instructions in the article below are designed to help repartition and format a hard drive. This process is Data Destructive and cannot be undone.
Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST!. Open Disk Utility. Please See.
In the top menu bar, go to View, and choose Show All Devices. Click the eject button next to the drive volume (My Passport, etc) The drive Volume will now be greyed out. Select the drive (WD My Passport Media, etc). Click the Erase button. Choose a new Format: Mac OS Extended (Journaled) Choose Scheme: GUID Partition Map.
Type the drive new Name. Click the Erase button. When finished, the drive will be formatted and repartitioned successfully. Click the Done button. Critical: The instructions in the article below are designed to help repartition and format a hard drive. This process is Data Destructive and cannot be undone.
Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST! Steps for macOS 10.11.x (El Capitan) and macOS 10.12.x (Sierra).
Open Disk Utility. Please See.
Click the Eject button next to the external hard drive volume (My Passport, etc). The drive will now be greyed out. Click the Erase button. Choose a new Format: Mac OS Extended (Journaled) Choose Scheme: GUID Partition Map.
Type the drive new Name. Click the Erase button. When finished, the drive will be formatted and repartitioned successfully. Click the Done button. How to Format or Partition a Drive on Mac OSX 10.9.x (Mavericks) and 10.10.x (Yosemite) Partitioning a hard drive means preparing it to be used by the, creating a Volume for the OS to use.
Formatting, however, deletes the content of a volume to clean it, and assigns a file system to it so that data can be moved into and out of the volume. Both processes are normally done together. Critical: The instructions in the article below are designed to help repartition and format a hard drive. This process is Data Destructive and cannot be undone. Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST!
Mac OSX 10.9.x, and 10.10.x include a built in utility known as Disk Utility that can be used to partition and format a hard drive. To partition and format the drive with Disk Utility, follow these steps:.
Double left-click on the Mac HD, the internal Mac hard drive visible on the top-right corner of the desktop screen. Choose Applications from the left-side panel. While in there, open Utilities, and lastly double-click on Disk Utility. Disk Utility will now be open. In the left-side pane, choose the drive that is to be partitioned and formatted. Typically there are two listings for each drive unless more than one partition exists on a particular drive. Choose the drive listing that is farthest to the left for the drive that will be formatted.
It is usually directly above the name of the drive. In the example below, the one to be selected would be 495.78 GB WD My Passport 0830 Media. After selecting the appropriate drive, additional options will appear on the right-side pane. Click on Partition.
In the Partition area, click on the drop-down box under Partition Layout and select 1 Partition. Note: Partitioning a drive is only necessary if planning to use multiple partitions on the drive. It's recommended using a single partition in most cases, if the primary objective is to simply prepare the drive for use with the computer, no partitioning is required. No further action is required.
Click on the drop-down next to Format and from the drop-down menu select Mac OS Extended (Journaled). This is the format that the drive will be formatted to. In the Name area, a drive name can be given to the drive by just typing in the desired name or drive label. Click the Options button and choose Apple Partition Map. Then, click on Ok. Lastly, click on Apply.
Important: If the Mac computer being used is an Intel-based Mac, Apple recommends to use the GUID Partition Table instead. A confirmation box will appear, reminding users that partitioning and formatting the drive will erase all information that is on the drive. Make sure that all critical information on the drive is backed up elsewhere before continuing. If not, copy the data to another location. When ready, click on Partition. The disk will be unmounted before being formatted. Note: If an error message is received stating that the drive is unable to be unmounted, this means that there is a program or service currently reading or writing data on the drive.
Determine what program is accessing the drive and shut it down before trying to format the drive again. If the error message persists, restarting the computer may resolve the issue. If additional assistance is required, please. The drive is now formatting and at the bottom of the Disk Utility panel a Status Bar displaying the name of the drive, the format that's being applied to it, as well as the given name. When finished, the bar will go away and the drive will now be listed on the desktop. How to Format or Partition a Drive on Mac OSX 10.7.x (Lion) and 10.8.x (Mountain Lion) Partitioning a hard drive means preparing it to be used by the, creating a Volume for the OS to use.
Formatting, however, deletes the content of a volume to clean it, and assigns a file system to it so that data can be moved into and out of the volume. Both processes are normally done together. Critical: The instructions in the article below are designed to help repartition and format a hard drive. This process is Data Destructive and cannot be undone.
Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST! Mac OSX 10.7.x, and 10.8.x include a built in utility known as Disk Utility that can be used to partition and format a hard drive. To partition and format the drive with Disk Utility, follow these steps:.
Double left-click on the Mac HD, the internal Mac drive. Choose Applications, then Utilities, and double-click on Disk Utilities. Note: If the screen does not look like the one in the picture below, the folder view may be set to a different one. Click on the Columns button (it's highlighted in blue in the screenshot) in the upper left corner of the window to change to the same view used here. In the far left pane, choose the drive that is to be partitioned and formatted. Typically there are two listings for each drive, unless that particular drive has more than one partition in it.
Choose the drive listing that is farthest to the left for the drive that is to be formatted. It is usually directly above the name of the drive. Once the drive has been selected, click on the Partition tab. Under Volume Scheme click the drop-down box and select 1 partition. Now, click the Options button and choose Apple Partition Map, then click on Ok. Important: If the Mac computer being used is an Intel-based Mac, Apple recommends to use the GUID Partition Table instead. Click on the drop-down next to the Format option and change the Format to Mac OS Extended (Journaled).
A name can also be given to the drive by typing it into the Name box. When done, click on Apply. A box will come up warning that formatting and partitioning the drive will erase all of the information that is on the drive. If the information on the drive is no longer needed, then click on Partition. If the data on the drive is still needed, it will need to be copied to another location before proceeding. The drive is now formatting, and a status bar will be displayed at the bottom of the Disk Utility window.
This status bar will say formatting the disk, and gives the name of the drive, the format it is applying, and the name that was specified for it. When it is done, this bar will go away and the drive should now be listed on the desktop. If additional assistance is required, or more information is needed, please. Do not use the answer rating below to report technical issues.
This answer explains how to format a drive in the exFAT or FAT32 file system. This allows the drive to be used on both Windows and macOS.END A Western Digital external hard drive can be used on both Windows and Mac OSX. This is useful if a drive is being used under both to move files between the two environments. Most WD Drives come formatted in the NTFS (Windows) or HFS+ (Mac) format. For a hard drive to be able to be read and written to in both a PC and Mac computer, it must be formatted to or file format.
FAT32 has several limitations, including a 4 GB per-file limit. This is a file system limitation that affects both Mac's and PC's, and the only workaround is to format the drive to exFAT.
For more information about what these limitations are please see. The easiest way to format the drive to or is by using macOS's built-in Disk Utility or Windows' built-in Disk Management. Critical: Never attempt to connect any external drive to multiple computers at the same time. This could quickly damage the drive's partition and corrupt the data on the drive. ExFAT in macOS 10.11 (El Capitan) and above There are two easy ways to format a drive to use is by using Mac OSX's built-in Disk Utility; using Erase (Step 4) or Partition (Step 7). For instructions on how to do this, please see the instructions below:. Connect the WD drive to the Mac computer.
Double left-click on the Mac HD, the internal Mac hard drive visible on the top-right corner of the desktop screen. Choose Applications from the left-side panel. While in there, open Utilities, and lastly double-click on Disk Utility.
Disk Utility will now be open. In the left-side pane, choose the drive that is to be partitioned and formatted. Typically there are two listings for each drive unless more than one partition exists on a particular drive.
Choose the drive listing that is farthest to the left for the drive that will be formatted. It is usually directly above the name of the drive. In the example below, the one to be selected would be WD My Passport 07BA Media.
Erase. After selecting the appropriate drive, additional options will become available on the top part of the Disk Utility window. Click on Erase. The Erase window will now appear. Assign the name that will be given to the drive, and click on Erase. When the Erasing process is completed, click on Done. Partition.
Click on Partition on the top menu of the Disk Utility window. The Partition window will now appear. Click next to Format to display a drop-down menu, and select exFAT. This is the format that the drive will be formatted to. Confirm that the name of the drive is correct in the Partition area, and update it if necessary. When ready, click Apply. Disk Utility will begin the formatting and repartitioning process.
This may take several minutes. Note: If an error message is received stating that the drive is unable to be unmounted, this means that there is a program or service currently reading or writing data on the drive. Determine what program is accessing the drive and shut it down before trying to format the drive again. If the error message persists, restarting the computer may resolve the issue. If additional assistance is required, please. When finished, the drive will be formatted and repartitioned successfully.
Click on Done. ExFAT in macOS 10.10 (Yosemite) and earlier One of the easiest ways to format a drive to use is by using Mac OSX's built-in Disk Utility. For instructions on how to do this, please see the instructions below:. Begin by connecting the WD drive to the Mac computer.
Once the drive appears on the desktop, click on Go on the top tool bar. From the drop-down menu, click on Utilities. In Utilities, select and open Disk Utility. When Disk Utility opens, select the drive that is to be partitioned and formatted from the left-side panel. Typically there are two listings for each drive, unless there is more than one partition on a particular drive.
Choose the drive listing that is farthest to the left for the drive that will be formatted. It is usually directly above the name of the drive, and is the drive selection that has the total size being displayed. Once selected, click on Partition on the right-side area. In the Partition area, click under Partition Layout and select 1 Partition.
Then, click on Options. In the Options window select Master Boot Record and then click Ok. To the right, insert a name for the drive, and click on Format. From the drop-down, select ExFAT.
When done, click on Apply. A window will come up showing that formatting and partitioning the drive will erase all data that is on the drive.
If there's no needed information within the drive, then click on Partition. If there is data on the drive that is needed or is not backed up, it will need to be copied to another location before proceeding. The drive is now formatting and a status bar will be seen at the bottom that says formatting the disk and gives the name of the drive, the format it is applying, and the name that was specified.
When it is done, this bar will go away and the drive should now be listed on the desktop. ExFAT in Windows 10 Another easy way to format a drive to use is by using Windows' built-in Disk Management.
For instructions on how to do this, please see the instructions below:. Right-click on Start, the Windows logo on the bottom-left of the screen, and click Disk Management. In the Disk Management window, the lower pane will display a list of available drives.
Identify the drive that needs to be partitioned and formatted, and make sure that all critical data on this drive has been backed up elsewhere. If there is already a partition on the drive, the bar above that drive will appear blue. If there is no critical data on the drive, or the data has been successfully backed up, right-click the bar and click Delete Volume. Important: If Disk Management shows the drive as Not Initialized, the drive will have to be initialized.
How To Format An External Hard Drive For Mac
For assistance initializing a hard drive, please see. If there is no partition and data on the drive, it will appear as Unallocated, with a black bar on top. Right-click the Unallocated space or the black bar, and click New Simple Volume.
The Welcome to the New Simple Volume Wizard will open. Click Next to proceed.
Choose the volume size and click Next. By default, the maximum disk space is already selected and it is recommended to leave it at the maximum disk space. Note: To create multiple partitions, select or type a specific number of megabytes (MB) for the first partition and continue to the next step. Once done with this process, the remaining space will display as unallocated space. Now, create another New Simple Volume in the remaining unallocated space for the next partition. For example, on a 2TB drive, set the volume size to 1000000 (1 TB) and continue to the next step.
When done, begin the New Simple Volume process again and select the remaining capacity, the unallocated space, for another 1TB partition. Assign a drive letter to represent the volume being created, and click Next. By default, this is the next available letter. Next is the File System, which controls how the data is read and written. Set the file system to exFAT, which is the default Windows file system, and leave the Allocation unit size to Default. The Volume Label field can be customized in order to give the volume a desired name, such as My Book or WD Black 1.
Check the box labeled Perform a quick format and click Next. Click Finish to begin formatting the drive. When complete, the drive will appear with a blue bar as in the image below.
Sandisk Usb Format Tool
Having trouble running office 11 for mac torrent. ExFAT in Windows 8 and earlier Another easy way to format a drive to use is by using Windows' built-in Disk Management. For instructions on how to do this, please see the instructions below:. Open Disk Management. In Windows 8 this can be achieved by moving the mouse to the bottom-left corner of the Desktop and right-clicking on top of the Start menu screen. Important: On Windows 7, Vista, or XP, instead click on Start, right-click on top of Computer and click on Manage. Then, click Disk Management right below Storage.
From the menu, click on Disk Management. Note: On other versions of Windows, Disk Management can be accessed through Control Panel, going to System Administrative Tools Computer Management. Disk Management will display the various disks that are available in that system. Locate the desired drive by looking at the drive information and drive size. When ready, right-click on top of the drive that is to be re-partitioned and reformatted, and click on New Simple Volume. The New Simple Volume Wizard will appear. Click on Next.
Leave the size of the volume to be the maximum disk space so it has only one volume. Click on Next.
Assign a drive letter for the drive to have once the process is at an end. Windows will automatically assign one, but this may be changed if so desired. When ready, click on Next. In the Format Partition section, select the File System to be exFAT and change the Volume Label to a desired name for the drive. Make sure the Perform a quick format check-box is highlighted, and when ready click on Next. The Wizard will display a summary of the selected settings for review. It is important to know that formatting and partitioning the drive will erase all data that is on the drive.
If there's no needed information within the drive, then click on Partition. If there is data on the drive that is needed or is not backed up, it will need to be copied to another location before proceeding.
If ready, click on Finish. The drive will indicate that it's Formatting for a few seconds, and once done, it will display as a Healthy (Primary Partition), and the drive will be available in the Computer area of Windows under the assigned drive letter. FAT32 in macOS 10.11 (El Capitan) and above The easiest way to format a drive to use is by using Mac OSX's built-in Disk Utility. For instructions on how to do this, please see the instructions below:. Begin by connecting the WD drive to the Mac computer.
Once that's done, double left-click on the Mac HD, the internal Mac hard drive visible on the top-right corner of the desktop screen. Choose Applications from the left-side panel. While in there, open Utilities, and lastly double-click on Disk Utility. When Disk Utility opens, all available drives will display on the left-side panel. From said list, select the drive that is to be partitioned and formatted from the left-side panel. Typically there are two listings for each drive, unless there is more than one partition on a particular drive. Choose the drive listing that is farthest to the left for the drive that will be formatted.
It is usually directly above the name of the drive. Once selected, click on Partition on the top area of the Disk Utility window. The Partition window will now appear. Next to Partition, assign the desired drive name for the device. Click on the drop-down next to Format and from the drop-down menu select MS-DOS (FAT).
This is the format that the drive will be formatted to. Now, click on Apply. Disk Utility will begin the formatting and repartitioning process. This may take several minutes. FAT32 in macOS 10.10 (Yosemite) and earlier The easiest way to format a drive to use is by using Mac OSX's built-in Disk Utility. For instructions on how to do this, please see the instructions below:. Begin by connecting the WD drive to the Mac computer.
Once the drive appears on the desktop, click on Go on the top tool bar. From the drop-down menu, click on Utilities. In Utilities, select and open Disk Utility. When Disk Utility opens, select the drive that is to be partitioned and formatted from the left-side panel. Typically there are two listings for each drive, unless there is more than one partition on a particular drive.
Choose the drive listing that is farthest to the left for the drive that will be formatted. It is usually directly above the name of the drive, and is the drive selection that has the total size of the drive being displayed. Once selected, click on Partition on the right-side area.
In the Partition area, click under Partition Layout and select 1 Partition. Then, click on Options.
In the Options window select Master Boot Record and then click Ok. To the right, insert a name for the drive, and click on Format. From the drop-down, select MS-DOS (FAT). When done, click on Apply. A window will come up showing that formatting and partitioning the drive will erase all data that is on the drive.
If there's no needed information within the drive, then click on Partition. If there is data on the drive that is needed or is not backed up, it will need to be copied to another location before proceeding.
The drive is now formatting and a status bar will be seen at the bottom that says formatting the disk and gives the name of the drive, the format it is applying, and the name that was specified. When it is done, this bar will go away and the drive should now be listed on the desktop. FAT32 in Windows 10 and earlier Important: Windows 10, 8, 7, Vista, and XP can only (using the actual operating system itself) create FAT32 partitions that are 32 GB or smaller. In order to format a drive larger than 32 GB using Windows OS, additional software may be required. Western Digital provides the software that allows users of our internal hard drives to format their drives. Users of our external drives will need to find third-party software to accomplish this task. Using Acronis True Image WD Edition for Windows (For Western Digital internal hard drives) Acronis True Image WD Edition can format any capacity internal single drive unit made by Western Digital.
Please see the following article on how to format a drive to FAT32 using Acronis True Image WD Edition:. Using Third-Party Software (For newer (made after 2007) external hard drives) As Windows is unable to format a drive over 32 GB in FAT32, the use of third-party software is required.
Western Digital cannot assist in acquiring or using third-party software to format a drive as FAT32. There are many different applications (many of them free) that can accomplish this. We recommend doing a search on or for more information. Should a Mac computer be available, we are able to provide support for formatting the drive as FAT32 under that OS.
Another option is to ask on our for community assistance in finding or using a FAT32 formatting application. Using the FAT32 Formatter for older WD drives Western Digital has a Windows based utility that will reformat an older Western Digital external USB or FireWire hard drive back to the factory default FAT32 partition. The FAT32 formatter software is only for older external single drive units and can only format a drive that is 1TB and below. It will not work on an external drive that is greater than 1TB in size. It also may not work on models released after 2007. When run, this utility can only create a single FAT32 partition for the full capacity of the hard drive.
Please follow the directions below to download and use the Western Digital FAT32 formatting utility. Download the (select the product being formatted from the list first).
Double-click on the file named ExtFat32vs2.00.zip and follow the onscreen prompts to install this program onto the computer. The file may need to be uncompressed using some type of uncompression or unzipping utility.
Check the box labeled I accept this License Agreement and click Next. Select the hard drive that is to be formatted and click on Start. Critical: All data on the target hard drive will be erased during this process. Please remove or backup any valuable data before performing this step. A pop-up message will appear warning that formatting the drive will erase all the data on the device. Click on Ok to continue. The final popup will warn again that this will erase all the data on the drive.
If this is the desired course of action, click on Yes. Unix/Linux (All Distributions) Western Digital technical support only provides jumper configuration (for internal hard drive) and physical installation support for hard drives used in systems running the Linux/Unix operating systems. For setup questions beyond physical installation of your Western Digital hard drive, please contact your Linux/Unix vendor. You may also wish to post on our for assistance from other users of our products who may be able to assist you with your issue. In case the answer did not answer your question, you can always visit the for help from WD users.